Acrobat M36, Руководство пользователя

Страница: 5 / 17

5
1- Safety Rules
Placing any part of the body on the machine while the machine is turned on is prohibited. It is also
prohibited to place on the machine or near the machine materials that are not mounted on the machine for
processing. These materials may be under the influence of a working machine vibrations and cause a threat
to the health of people in the vicinity.
It is forbidden to operate the machine by people who are not familiar with the manual.
The user is required to secure the area around the machine to protect bystanders from being hit by a
moving part of a machine or workpiece`s splinter.
The machine must be operated by no more than one person (the operator) at a time.
Operate wearing clothes with narrow buttoned cuffs.
Long hair should be tied up.
If you notice irregularities in the operation of the machine immediately stop the operation and contact your
service representative.
It is forbidden to operate the machinery while intoxicated.
Children can not approach the machine.
When the machine is running, stay clear of the rotating tap
It is forbidden to leave the machine running unattended.
When the machine is running do not perform any operations in its surrounding area.
Never service the machine with motor on.
Never operate, service, repair or adjust machine without proper instruction from your supervisor and
without reading and understanding the instruction manual. It is the employer's responsibility to implement
the above instructions and to provide proper safety measures necessary for each particular use, operation,
setup or service of the machine.
Do not remove the labels from machine for any reason.
Heat will occur because of tap's friction to material. Do not touch hot parts with bare hands.
This is a very important chapter because in the past purchasers of ACROBAT tapping machines used it in a
manner that endangered the persons in the vicinity of the machine and the environment in which the
machine was located.
The machine is built mainly of steel and can not be used for combustible materials and harmful. The
customer must check whether the processed materials meet these requirements and do not pose a threat
to people living in the vicinity.