Acrobat M24, Руководство пользователя

Страница: 12 / 18

12
7– Machine’s Operation
When you want to carry out tapping (See Picture 6) slightly loosen bolts with number 1 and number 2 as
seen on the picture (two bolts looking at each other). This way the front head will turn to horizon and
tapping head will be able to rotate 360 degrees.
Then only tighten bolts with number 2 and leave bolt with number 1 loose. Because head group needs to
be free during horizontal tapping process. It is to ensure that head and related tap move easily at the axis
of hole you drilled during horizontal tapping, and being able to adjust itself according to angle.
Your machine is ready for horizontal tapping process.
When your work is done with the machine, press the engine stop button (red button) on the unit and turn
off the pacco switch. If you are not working with the machine, keep the acrobatic arm closed...
Picture 6
2
1