Acrobat M24, Руководство пользователя

Страница: 10 / 18

10
7– Machine’s Operation
Button on handle at the end of acrobatic arm (See Picture 4) adjusts machine's spindle rotation direction.
Button stays at middle position automatically when machine is not used and spindle does not rotate. To be
able to turn spindle clockwise, press and hold the button to left. In that way spindle will rotate clockwise.
When you press and hold the button to right, spindle will rotate counter-clockwise.
ELCEK
Left Button
Attach the tap you want for tapping to tap holder with suitable metric according to your tap. If the tap
you will use is attached to a tap holder of different metric, your tap may break because of torque
disagreement. Place the teeth near tap holder in such a way to fit teeth sockets at the end of module, by
pushing the ring on module at the end of spindle upwards, and release the ring; locking mechanism will
work automatically and fix the tap holder. ( See Picture 4)To remove tap holder from its place, it will be
enough to lift ring on module upwards.
Bring the tap (which is suitable for the hole you drilled beforehand, or which you will tap) on the hole and
press slightly and provide mouthing (diameters of holes to be drilled according to taps for tapping can
be found at the end of guide).
Then by pressing button to left side, make spindle turn clockwise. This way tapping tool will begin
process of tapping for hole. When the process is done, by holding button pressed to the right, make the
spindle turn counter-
clockwise. In that way tap tool will come back from tapped hole. If you lubricate the tap with suitable
grease before contacting with the material it will increase cutting speed and extend the life of the tap.
Picture 4
Safe Tapping Holder
Ring
90 Degree
Damping
Right Button