Acrel ADW310, Инструкция по установке и эксплуатации, Страница: 22 / 23

22
Bit5 -Bit15: Reserved
0269H
617
Alarm 3 alarm status 2 R
Corresponding to alarm 3
enable bit
0218H 536 High power factor alarm threshold
2 R/W
Integer
Unit 0.0 01
0219H 537 Power factor high alarm delay
2 R/W
Integer
Unit 0.01S
0220H 544 The first circuit temperature is too high
alarm threshold
2 R/W
Integer signed
Unit 0.1
℃
0221H 545 The first circuit over temperature alarm
delay
2 R/W
Integer
Unit 0.01S
0222H 550 The second circuit temperature is too
high alarm threshold
2 R/W
Integer signed
Unit 0.1
℃
0223H 551 The second circuit over temperature
alarm delay
2 R/W
Integer
Unit 0.01S
0237H 567 Current unbalance too high alarm
delay
2 R/W
Integer
Unit 0.01S
0238H 568 The current forward active power
demand is too high alarm threshold
4 R/W
Integer, unit kW
3 decimal places
023AH 570 Current reverse active power demand
is too high alarm delay
2 R/W
Integer
Unit 0.01S
023BH 571 The current forward active power
demand is too high alarm threshold
4 R/W
Integer, unit kW
3 decimal places
023DH 573 Current reverse active power demand
is too high alarm delay
2 R/W
Integer
Unit 0.01S
023EH 574 The current forward reactive power
demand is too high alarm threshold
4 R/W
Integer, unit Kvar
3 decimal places
0240H 576 The current forward reactive power
demand is too high alarm delay
2 R/W
Integer
Unit 0.01S
0241H 577 The current reverse reactive power
demand is too high alarm threshold
4 R/W
Integer, unit Kvar
3 decimal places
0243H 579 The current reverse reactive power
demand is too high alarm delay
2 R/W
Integer
Unit 0.01S
0247H 583 Current apparent demand high alarm
threshold
4 R/W
Integer, unit KVA
3 decimal places
0249H 585 Current apparent demand high alarm
delay
2 R/W
Integer
Unit 0.01S
7 Common Troubleshooting
7.1 The instrument RS485 networking communication failure.
Troubleshooting suggestion: Please confirm whether the RS485 wiring is loose, the AB connection is reversed,
etc., and then press the button to check whether the general selection parameters in the table, such as
address, baud rate, check digit, etc., are set correctly.