background image

4

• The appliance must have a minimum

clearance of 50mm to combustible material
on the left and right sides of the appliance.

• This appliance is for indoor use only. It is not

designed to be installed outside. The
appliance must be kept away from any
source of damp or moist conditions. Avoid
any close contact with water.

• The appliance must be connected to a single

phase AC supply of the voltage specified on
the rating plate. 

• If the appliance is being connected directly to

the mains electricity supply, a fused switched

spur with a 13 amp fuse must be fitted. The
power supply must be able to handle 2000w
(2Kw) 

• The appliance must be earthed 

• Not to be used in conjunction with either an

extension lead or a timer. 

• All electrical work must comply with current

building regulations and electrical codes of
practice. 

• If there is any doubt about the suitability of

the installation site contact your supplier.

This appliance must be installed by a competent person.

Location

• This product comes complete with a UK 3 pin

plug. If the plug is removed for any reason, it
must be wired into an earthed power source.
Any alterations to the cable or power supply
must be carried out by a competent person.

• If the mains socket is to be concealed this

can be sited adjacent to the back of the
appliance, but must be easily accessible.

• Should the appliance be wired directly into

the mains supply a double pole switch fused
spur with a 13 amp fuse must be  fitted. It is
imperative that the power supply is capable
of handling a load of 2000 watts (2kw).

• If the power cable is damaged in any way it

MUST be replaced by a competent person.

• Do not connect the appliance to an extension

lead.

• The appliance must not be modified from the

manufacturer’s specification in any way and
the appliance must only be used for the
purpose recommended by the manufacturer.

• If the appliance shows any signs of damage it

is important that it is examined by a qualified
person.

• Failure to observe these instructions may

result in electric shock or other serious injury.

• Check the technical specification.

Electrical Work

Installation Instructions

ACR 600 900 1200 install manual 16pp 1021-9  14/02/2022  18:26  Page 4

Содержание PR-1200e

















Отзывы: