12/11/2021 912S-03765-01.00
11
USER MANUAL
2.3
Optical indications on activation
•
The green
LED will illuminate (blue
if RLS is enabled) for 1 second.
•
The strobe light
will start flashing.
•
Within 30 seconds of activation, the indicator LED will flash indicating AIS transmission.
•
Within 1 minute of activation, the indicator LED will flash a quick burst of 5 indicating
406MHz transmission.
2.3.1
LED Indications with RLS Enabled
LED
When
Transmit
GNSS
RLS
(x1)
Every 5 s
Searching
(x3)
Once
Fix acquired
(x5)
At transmit
406MHz
No Fix
Request sent
(x5)
At transmit
406MHz
Fix acquired
Request sent
(x8)
At transmit*
AIS
No Fix
(x8)
At transmit*
AIS
Fix acquired
(x1)
Every 2.5 s**
121MHz
Reply not received
(x1)
Every 2.5 s**
121MHz
Reply received
(x1)
Every 2.5 s
2.3.2
LED Indications for units configured with non-RLS Protocol
LED
When
Transmit
GNSS
(x1)
Every 5 s
Searching
(x3)
Once
Fix acquired
(x5)
At transmit
406MHz
No Fix
(x5)
At transmit
406MHz
Fix acquired
(x8)
At transmit*
AIS
No Fix
(x8)
At transmit*
AIS
Fix acquired
(x1)
Every 2.5 s**
121MHz
(x1)
Every 2.5 s
*
The AIS transmissions will show as 8 flashes (1 every 2 seconds) as a sequence repeated
once every minute
**
The 121MHz Homer will not transmit until after the first 406MHz transmission.
2.4
Deactivation
To deactivate your ResQLink AIS after use or if it is accidentally activated, press the TEST/OFF Key
until the LED flashes red twice, then release. As long as it is turned off within 30 seconds of activation
there is no requirement to contact the authorities (see section 2.7 False Alerts).
NOTE:
Non-RLS Protocol is usually
country specific and is not a
user changeable function.
