ACR Electronics PLB-350B Скачать руководство пользователя | Manualshive

Страница: 21 / 23

background image

Y1-03-0241-2D

20

APPENDIX D - WARRANTY, NOTICES

Limited Warranty

This product is warranted against factory defects in material and workmanship for a
period of 1 (one) year* from date of purchase or receipt as a gift. During the
warranty period ACR Electronics, Inc. will repair or, at its option, replace the unit

at

no  cost  to  you  for  labor,  materials  and  return  transportation  from  ACR.  For  further
assistance,  please  contact  our  Technical  Service  Department  at  ACR  Electronics,
Inc.,  5757  Ravenswood  Road,  Fort  Lauderdale,  FL  33312-6645.   Email:

[email protected]

, Fax: +1 (954) 983-5087, Telephone: +1 (954) 981-

3333.

This  warranty  does  not  apply  if  the  product  has  been  damaged  by  accident  or
misuse,  or  as  a  result  of  service  or  modification  performed  by  an  unauthorized
factory.   Except  as  otherwise  expressly  stated  in  the  previous  paragraph,  THE
COMPANY  MAKES  NO  REPRESENTATION  OR  WARRANTY  OF  ANY  KIND,
EXPRESS  OR  IMPLIED,  AS  TO  MERCHANTABILITY,  FITNESS  FOR  A
PARTICULAR  PURPOSE,  OR  ANY  OTHER  MATTER  WITH  RESPECT  TO  THIS
PRODUCT. The Company shall not be liable for consequential or special damages.

To place the warranty in effect, register online at

www.acrelectronics.com

or return

the attached card within 10 days.

*Five years for the following products: EPIRB, PLB, S-VDR, SSAS.

Notices

ACR Electronics diligently works to provide a high quality Product Support Manual,
however, despite best efforts, information is subject to change without notice, and
omissions and inaccuracies are possible. ACR cannot accept liability for manual
contents. To ensure that you have the most recent version of the Product Support
Manual, please visit the ACR website at

www.acrelectronics.com

.

©2009  by  ACR  Electronics,  Inc.,  part  of  Cobham  plc.  All  rights  reserved.
Reproduction  in  whole  or  in  part  is  permitted  only  with  permission  of  ACR
Electronics, Inc.

Ongoing product improvements may change product specifications without notice.

Trademarks or registered trademarks are the property of their respective owners.

«
...
19
20
21
22
23
»

Содержание PLB-350B
























Отзывы:

Нет отзывов

Похожие инструкции для PLB-350B

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды