background image

Y1-03-0241-2D

 

18 

APPENDIX B - THE COSPAS-SARSAT SYSTEM 

1.  General overview 

Beacons transmit to the satellite portion of the  Cospas-Sarsat system. Cospas-
Sarsat satellites are an international system that utilizes Russian Federation and 
United  States‟  low  altitude,  near-polar  orbiting  satellites  (LEOSAR).  These 
satellites assist in detecting and locating activated 406 MHz satellite beacons. 
 
Cospas-Sarsat  satellites  receive  distress 
signals  from  beacons  transmitting  on  the 
frequency  of  406  MHz.  The  Cospas-Sarsat 
406  MHz  beacon  signal  consists  of  a 
transmission  of  non-modulated  carriers 
followed  by  a  digital  message  format  that 
provides  identification  data.  The  406  MHz 
system  uses  satellite-borne  equipment  to 
measure  and  store  the  Doppler-shifted 
frequency  along  with  the  beacon‟s  digital 
data  message  and  time  of  measurement. 
This information is transmitted in real time to 
an earth station called the Local User Terminal (LUT), which may be within the 
view of the satellite, as well as being stored for later transmission to other LUTs. 
 
The  LUT  processes  the  Doppler-shifted  signal  from  the  LEOSAR  and 
determines  the  location  of  the  beacon,  then  the  LUT  relays  the  position  of  the 
distress to a Mission Control Center (MCC) where the distress alert and location 
information  is  immediately  forwarded  to  an  appropriate  Rescue  Coordination 
Center (RCC). The RCC dispatches Search and Rescue (SAR) forces. 
 
The addition of the GEOSAR satellite system greatly improves the reaction time 
for a SAR event.  This satellite system has no Doppler capabilities at 406 MHz, 
but  will  relay  the  distress  alert  to  any  of  the  LUT  stations.  When  there  is  GPS 
data  included  in  the  distress  message,  SAR  authorities  instantly  know  your 
location  to  within  110  yards  (100  m).  This  speeds  up  the  reaction  time  by  not 
having to wait for one of the LEOSAR satellite to pass overhead. Because most 
of  the  search  and  rescue  forces  presently  are  not  equipped  to  home  in  on  the 
406 MHz Satellite beacons signal, homing must be accomplished at 121.5 MHz. 
 
Once  the  406  MHz  signal  is  relayed  through  the  LEOSAR  and/or  GEOSAR 
network, SAR forces determine who is closest, and then proceed to the beacon 
using the 121.5 MHz homing frequency. 
 

2.  Global Positioning System (GPS)  

The  GPS  system  is  a  satellite  group  that  enables  a  GPS 
receiver to determine its exact position to within 30 m (100 
ft.)  anywhere  on  earth.  With  a  minimum  of  24  GPS 
satellites  orbiting  the  earth  at  an  altitude  of  approximately 
11,000  miles  they  provide  users  with  accurate  information 
on  position,  velocity,  and  time  anywhere  in  the  world  and  in  all  weather 
conditions.  Beacons  that  have  GPS  engines  add  this  data  to  its  distress 
transmission, allowing search and rescue forces to narrow the search to a very 
small area, thus minimizing the resources required, and dramatically increasing 
the effectiveness of the overall operation.  

Содержание PLB-350B
























Отзывы:

Похожие инструкции для PLB-350B