ACR Electronics OWL 100 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 55

ACR Electronics OWL 100 Скачать руководство пользователя страница 21

OWL Data Logger

14

Copyright © 2010 ACR Systems Inc. All Rights Reserved.

1.2.2.3

Logger Triggering
High & Low Triggers

Triggers are used to indicate when any reading has exceeded preset thresholds and begin

logging once the limit has been crossed.

The Trigger Threshold values for the OWL Logger are based upon the Equation and limited by

the Midpoint/Range selected. If you change the Range values the High and Low Trigger

values will also change. The maximum High Trigger will not exceed the maximum Range

value and the minimum Low Trigger will not be less than the minimum Range value.

* For the OWL, the High and Low Triggers enable you to set upper and lower limits inside

which the OWL will not log depending on the Flash mode you select. The Alarm and Failsafe

Alarm Flash modes will allow the logger to record within the trigger limits.

To set the High or Low Trigger, click on the trigger's field. Next, click on the small button that

appears at the right. This will pop up a form where you can drag the slider bars to set the

appropriate trigger level.

Flash Type

The Flash selection, shown only in the Edit Setup window, indicates under which conditions

the logger's light will flash and when logging will start. The light flashes every 8 seconds and

the Flash function is not available in fast sample mode. The Flash modes available are:

·

Off

: the light will never flash.

·

Until Tripped:

the light will flash until the OWL starts logging.

·

Until Full:

the light will flash until the logger is full.

·

While Logging:

the light will flash while the logger is taking readings.

·

Always:

the light will always flash.

·

Alarm:

the light will blink after an event (note that the logger will log within the trigger

limits, but will only flash after exceeding the trigger).

·

Failsafe Alarm:

the light will flash before the event (note that the logger will log within

the trigger limits, but will flash when exceeding the trigger).

To set the Flash mode, click on the Type field and select the mode from the drop-down list.

«
...
19
20
21
22
23
...
»

Содержание OWL 100
























































Отзывы:

Нет отзывов