PuliMATIC - ENGLISH
MAN141 PAGE E-14
A2.6 Diagnostics page
DIAGNOSTICS PAGE STEPS:
2-
Access the diagnostics page
4.1
Manual step mode operation of the gearmotor
4.2
Manual continuous mode operation of the gearmotor
5-
Solenoid valves enabling/disabling (Optional)
6-
Confirm settings
1- Access the diagnostics page
Press
sequentially and hold the pressure for 7
seconds on the indicated buttons
2.1- Manual step mode operation of the gearmotor
Press
repeatedly to operate the gearmotor in step
mode
2.2- Manual continuous mode operation of the gearmotor
Press
hold the pressure to operate the gearmotor in
continuous mode
3- Solenoid valves enabling/disabling (Optional)
Press
to activate the solenoid valve (ON) or
deactivate it (OFF)
3- Confirm settings
Press
to confirm and exit the diagnostic page
If the filter is not in the correct position when exiting the diagnostic page, the gearmotor will start to
rotate until the system reaches the original filtration position.
The diagnostic page is used to display the correct operation of the filter and to carry out
the filter disinfection procedure.
Hall Sensor:
ON
Pressure Sensor:
OFF
Motor:
OFF
Solenoid 1:
OFF
Solenoid 2:
OFF
Mot
Ext
Rly
