ACP OMNISTIM 500 PRO Скачать руководство пользователя страница 9

Страница: 9 / 44

OMNISTIM

500 PRO USER MANUAL

THE OMNISTIM

500 PRO

Delivery of the Omnistim

500 Pro

Upon receipt of your Omnistim

500 Pro inspect the shipping container and contents for any obvious or concealed

damage. All ACP products are packaged carefully for rapid, safe delivery. We guarantee delivery in perfect

condition to the postal or delivery services. However any damage or loss incurred during transportation or delivery

is the Postal or Delivery Company’s responsibility. If damage or loss to the product and/or container is obvious or

suspected, appropriate notation must be made on the signed freight bill at the time of delivery. All damage claims

should be promptly filed with the delivering carrier and must be initiated by the addressee where the package was to

be delivered. Retain the original shipping container and inserts for validation of damage claim or use at a later date.

Unpack and check all accessories. A list of enclosed accessories is provided with each unit to assist you in

identification of the type and number of accessories.

NOTE:

The purpose of this manual is to acquaint you with the Omnistim

500 Pro’s operating features and

functionality. Please read the manual carefully before attempting to operate the Omnistim

500 Pro. If

questions remain unanswered, contact your ACP sales representative or call 1-800-350-1100. Outside the USA

call 1-775-685-4000.

Introduction

The Omnistim

500 Pro is designed to provide Interferential Current Therapy (IFC), Medium Frequency Alternating

Currents (MFAC), Low Voltage Pulsed Current (LVPC) and High Voltage Pulsed Current Therapy (HVPC). Its

two separate generators produce medium frequency (2000, 2500, 4000 or 5000 Hz) alternating current in continuous

or modulated modes. Two isolated output circuits with independent intensity controls are provided. The output of

each circuit is easily determined in milliamps through the display screen. The digital timer allows the operator to

select the length of the total treatment time and to monitor the time remaining in minutes.

The Omnistim

500 Pro offers Frequency Difference (FD) and Full Field (FF) Interferential Current Therapy. An

interferential vector scanning mode can be turned off or on for stationary or continuous movement of the

interferential field.

The Omnistim

500 Pro MFAC and LVPC modes with fully adjustable ON and OFF times and ON and OFF ramps

provides a wide variety of uses for muscle re-education and muscle spasm reduction protocols for innervated

muscle.

The Omnistim

500 Pro provides High Voltage Pulsed Current (HVPC) on one channel. Continuous or surged

operation with fully adjustable ON and OFF times and ramps allow applications of HVPC therapy. Increasing

circulation, pain control and muscle re-ed can be set up in this mode.

Содержание OMNISTIM 500 PRO













































Результаты поиска

Содержание OMNISTIM 500 PRO

Отзывы:

Бренды по названию

Популярные бренды

ACP OMNISTIM 500 PRO, Руководство пользователя

Результаты поиска

Содержание OMNISTIM 500 PRO

Отзывы:

Бренды по названию

Популярные бренды