©2020 ACP, Inc.
Cedar Rapids, IA 52404
Page 21 of 24
Part No. 20072103
Original Instructions
There are several options you can change to customize the
operation of the oven. Options are shown below.
The
factory setting is shown in bold type.
STYLE 2
User Options
STANDARD DEFAULT PER MODEL (FACTORY SETTINGS IN BOLD)
Factory setting may vary by model
KEYPAD
SETTING
DISPLAYED OPTIONS
DESCRIPTION
1
Double Digit Entry
Disabled
Enabled
Allows 10 (0-9) preprogrammed pads.
Allows 100 (00-99) preprogrammed pads.
2
Manual
Programming
Disabled
Enabled
Manual time entry/cooking not allowed.
Manual time entry/cooking allowed.
3
Reset on Door
Open
Disabled
Enabled
Opening oven door does not reset oven back to ready mode.
Opening oven door does resets oven back to ready mode.
4
Keybeep
Off
On
Keys do not beep when pressed.
Keys beep when pressed.
5
Speaker Volume
Off
Low
Medium
High
Keybeep volume OFF.
Keybeep volume LOW.
Keybeep volume MEDIUM.
Keybeep volume HIGH.
6
End of Cook
Signal
Solid Beep
3 Second Beep
4 Beeps Once
4 Beeps Repeating
Food done signal is a continuous beep until reset by user.
Food done signal is a three second beep.
Food done signal is four beeps, once.
Food done signal is four beeps, four times.
7
Keypad Active
15 seconds
30 seconds
60 seconds
120 seconds
Always
Keypad time entry window is 15 seconds.
Keypad time entry window is 30 seconds.
Keypad time entry window is one minute.
Keypad time entry window is two minutes.
Keypad time entry window is always active.
0
Quantity Prompt**
Disabled
Enabled
Allows user to cook individual portions and/or use quantity keypad.
Prompts the user for portion quantity multiplier (1-9) upon selecting a preset program.
STAGE KEYPAD
Clean Filter
Message
Frequency
Disabled
Weekly
Monthly
Quarterly
Oven will not display “Clean Filter Message”.
Oven will display “Clean Filter Message” every seven (7) days.
Oven will display “Clean Filter Message” every thirty (30) days.
Oven will display “Clean Filter Message” every ninety (90) days.
** Available on select models only. (Only displayed in User Options menu if factory option is enabled)
Access and Modify User Options
From READY screen:
1.
Press HIDDEN keypad.
• Hidden keypad is unmarked.
• Nothing will be displayed when hidden keypad is pressed.
2.
Press PROGRAM SAVE keypad.
•
The first user option will display. Oven is now in options mode.
3.
Press number keypad that corresponds to setting.
• See table below for keypads/settings/options.
• Setting and the currently selected option will display.
4.
Press numeric keypad again to toggle through list of options for the keypad/setting.
• Each time keypad is pressed, the displayed option will change.
•
Changes take affect after keypad is pressed.
• Press PROGRAM SAVE keypad to save changes.
5.
Press STOP/RESET keypad to exit, or open and close oven door.
Hidden Keypad
Program Save