background image

©2019 ACP, Inc.

Cedar Rapids, IA 52404

Page 2 of 11

Part No. 20267601

Original Instructions

Model Identification

Any questions or to locate an authorized ACP servicer, call 
ACP ComServ Service Support.

•  Inside 

the U.S.A. or Canada, call toll-free at  

1-866-426-2621.

•  Outside

 the U.S.A. and Canada, call 1-319-368-8195.

•  Email:

 [email protected] 

Warranty service must be performed by an authorized ACP 
servicer. ACP also recommends contacting an authorized 
ACP servicer, or ACP ComServ Service Support if service is 
required after warranty expires.

When contacting ACP, provide product information. Product 
information is located on oven serial plate. Record the 
following information:

Model Number: _________________________________
Manufacturing Number: ___________________________
Serial or S/N Number: ____________________________
Date of purchase: _______________________________
Dealer’s name and address: _______________________
______________________________________________  
______________________________________________

Keep a copy of sales receipt for future reference or in case 
warranty service is required.

Before using your oven, please take the time to read the Safety Instructions which shipped with the oven. 

Information herein is subject to change without notice. Errors are subject to correction.  
For the most recent product literature, please visit 

acpsolutions.com/product-literature/ 

Содержание MMS A Series












Отзывы: