ACP 728028377125, Быстрый старт и справочное руководство

Страница: 18 / 26

©2019 ACP, Inc.
Cedar Rapids, IA 52404
For full product documentation visit:
www.acpsolutions.com
1
Part No. 20269801
Revised 6/2019
Quick Start Reference Guide
|
AXP & MXP High Speed Commercial Combination Oven
Refer to Product Safety Manual for Safety Statements. Complete Owner’s Manual available online
This oven can be set to a preheat
temperature between 200°F (95°C) and
520°F (270°C).
1. Oven must be plugged in.
(
Screen will
power on to “Standby mode” within approximately
30 seconds.)
2. Touch the green “Power” icon
3. The preheat temperature of the oven will
appear in the display.
Touch the power key again to interrupt
preheating, or touch the blue menu icon to
access main menu and user options.
Oven Operation
Turn the Oven On, Preheat
Oven Clearances
A. Allow at least 2” (5.1 cm) of clearance around top of oven.
Proper air flow around oven cools electrical components.
With restricted air flow, oven may not operate properly and
life of electrical parts is reduced.
B. There is not an installation clearance requirement for the
back of the oven.
C. Allow at least 1” (2.54 cm) of clearance around sides of
oven.
D. Install oven so oven bottom is at least 3 feet (91.5 cm)
above floor.
Cooking with Preprogrammed Menu Items
1. After oven has preheated to desired temperature, open oven door,
place food in oven and close door
2. Scroll to choose desired food item from menu and touch the food item you
wish to cook. The cook cycle will begin and screen will show remaining
cook time.
Note: If “Preheat Warning” is enabled (customized user setting, see
page 6), and preheat temperature differs from default preheat temperature,
the control will interrupt cook cycle.
To guarantee that oven reaches desired temperature before cook cycle begins,
enable “Preheat Warning” in user options.
3. At the end of the cooking cycle, the oven beeps, and displays animation.
Remove the food from the oven.
Care and Cleaning Basics
Refer to Owner’s Manual for complete instructions and
recommendations (available online)
DO wear protective gloves and glasses
DO always use recommended cleaning supplies:
Damp towel, plastic scouring pad, ACP Oven Cleaner
and ACP Oven Shield Protectant
DO allow oven and tools to cool before cleaning
DO NOT use caustic cleaning products
DO NOT use water pressure style cleaning systems
DO NOT spray cleaning solution into perforations.
Page 18 of 26