background image

INSTALLATION AND POSITION

This  amplifier  should  be  positioned  on  a  flat  stable  surface.  We  would 

recommend that the position of your hi-fi equipment should be chosen carefully 

to provide adequate protection for this device, but also provide an attractive 

showcase for your investment. Hi-fi equipment is not designed to be moved 

often, therefore it is recommended that a permanent home for your hi-fi be 

achieved as soon as is possible.  

As  this  amplifier  is  fitted  with  a  powerful  mains  transformer,  it  is  not 

recommended that sensitive audio equipment such as turntables or cassette 

decks be placed immediately next to it. Do not place the SP101 in areas of 

direct sunlight, nor place it adjacent to a radiator or other heating appliances. 

Like  all  amplifiers  the  SP101  will  generate  a  modest  amount  of  heat.  The 

cooling of this device is reliant upon the flow of air through the chassis grilles 

which are located on the top and bottom of the cabinet. Care should be taken 

not to cover these grilles with items such as rugs, covers or curtains which will 

restrict this air flow. Do not place the amplifier on a soft surface as this may 

result  in  the  bottom  grille  becoming  restricted,  and  as  a  result  may  lead  to 

over-heating.

Do not place records, tapes or compact discs on top of the unit. Be aware that 

after prolonged usage the chassis of this unit will become hot.

  

Never allow the amplifier to come into contact with water or liquids, and ensure 

that small objects do not fall through the ventilation grilles. In the event of this 

happening, disconnect the wall plug form the mains supply immediately, and 

contact your local dealer for service advice.

Do not position the power cable such that it can be walked upon, or damaged 

by regular traffic. Ensure that all other interconnecting cables such as speaker 

cables or ancillary equipment leads, are stowed safely behind the unit, and 

cannot be easily snagged or kicked thus causing possible damage to the unit.

Ensure  that  all  interconnetion  cables  have  been  fitted  correctly,  and  that 

polarity  has  been  maintained. This  is  especially  important  when  connecting 

loudspeakers to this amplifier. On the rear panel, binding post speaker outputs 

are provided. These are coloured red for positive, and black for negative.

There  will  be  a  corresponding  pair  of  terminals  on  the  rear  of  suitable 

loudspeakers. These terminals should be connected together with adequate 

quality  speaker  cables,  taking  care  that  the  red  terminal  on  the  amplifier  is 

connected to the red terminal on the loudspeaker. The same process should 

occur for the black terminals.  Care should be taken to ensure that no wires 

have become frayed during this process, and subsequently could be touching 

each other. This will cause a short circuit on the output stage of the amplifier, 

and will result in a poor or distorted sound. Failure to rectify this problem may 

result in long term damage to this unit.     

Position the loudspeakers a suitable distance away form the amplifier, gaining

enough  distance  to  allow  the  stereo  image  to  be  achieved.  Having  the 

loudspeakers too close to each other will not allow you to fully define the stereo 

content of music played through the system, plus may result in poor sound 

due to the cancellation properties that sometimes exist when in this state.  It 

is not ideal to place loudspakers in the corners of a room as this will normally 

colour the audible content of the music with a lift in bass content. Although it 

is  sometimes  desirable  to  increase  the  bass  response  of  your  system,  this 

can lead to a ‘boomy’ bass which is not always desirable, and can be hard to 

control. It should also be noted that firing loudspeakers onto a hard flat surface 

can  cause  mid  range  and  high  frequency  colouration  as  reflected  sound 

becomes part of the audible sound. This can lead to a harshness, or dead 

spots through cancellation.     

 

The best sound is always subjective to the listener, therefore we suggest you

arrange your hi-fi to suit your own listening tastes, and sit back and enjoy the 

fruits of your labour.   

5

Содержание SP 101













Отзывы: