ACOUSTIC SOLUTIONS DS 1133, Инструкция по эксплуатации

Страница: 10 / 12

TROUBLE SHOOTING
PROBLEM POSSIBLE SOLUTION
System does not
switch on:
• Check mains lead is securely fitted to a working
mains outlet socket.
No sound from
one or more
channels:
• There is a short delay after switching on before
the system starts functioning.
• Check all speaker connections are correct and all
leads are secured.
• Check all input leads are correctly wired and all
connectors are securely fitted.
• Check the settings of the input device.
• Check channel volume settings.
• Check that MUTE or STANDBY is not selected.
Volume level
low:
• Check master volume setting.
• Check individual channel volume settings.
Sound
distortion:
• Check all inputs are correctly wired up.
• Check input device settings.
• Check that the volume level is not set too high.
No sound from
rear channels:
• Check to ensure that that the DVD disc contains a
5.1 Dolby Digitial or DTS soundtrack.
• If listening to the AUX input, use the LISTEN
MODE selector on the remote control to select a
Pro Logic II mode (see page 8)
Remote control
not operating
correctly:
• Check the battery, if the remote controller only
works when close to the DS 1133, the battery is
getting low - replace with suitable 1.5 V AAA sized
battery.
• Check there is nothing obscuring the remote
signal sensor on the front panel.
• Check the sub woofer unit is not in direct sunlight,
as this can reduce the effectiveness of the remote
controller.
SPECIFICATIONS
POWER OUTPUT 190 WATTS
Front channel 2 x 25 watts (16 ohms)
Centre channel 25 watts (16 ohms)
Rear channel 2 x 25 watts (16 ohms)
Subwoofer channel 65 watts (6 ohms)
FREQUENCY RESPONSE 40Hz ~ 20KHz (+ 2 dB)
POWER CONSUMPTION < 120 W
POWER SUPPLY 230 Volts 50Hz
9