ACOUSTIC SOLUTIONS 4144845, Инструкция по эксплуатации

Страница: 12 / 20

12
Wire FM aerial
Please make sure that the wire FM aerial supplied is plugged into the socket on the back of
the Bluetooth speaker and is fully extended before you attempt to tune to an FM station. This
will ensure that the maximum signal strength is available when the Bluetooth speaker begins
to scan. Extending the aerial also ensures the best possible sound quality.
FM Radio mode
If you are not already in FM mode, briefly press and release the ‘M’ button on the top of the
Bluetooth speaker until you are in FM mode, or the ‘FM’ button on the remote control (check
the display, an FM frequency such as 93.30 will be displayed).
If you were listening to an FM station when you switched the Bluetooth speaker off then this
station will be automatically selected when you switch the Bluetooth speaker back on.
Tuning to an FM station
In FM mode:
1. Press and release the
button on the top of your Bluetooth speaker or the ‘Search’
button on the remote control. Your Bluetooth speaker will automatially scan and store
those stations with the strongest signal, up to a total of 20. It will store the FM radio
stations found to its preset memories.
2. Briefly press and release the or the button on the top of your Bluetooth speaker
or on the remote control to move through the stored preset stations (CH01-CH20), until
you locate your favourite station.
Note: If FM reception is poor check that the wire aerial is fully extended or try moving the
Bluetooth speaker to another location.
Using the FM radio