Ngara
User Manual
4
Local Operation
The Ngara noise logger provides local interfacing capabilities allowing the user to –
• Configure logging parameters
• Start/Stop logging sessions
• Display current configuration information
• Display current logger status and results information
• Carry out disk operations
4.1 Available User Interface
The local interface provided by Ngara consists of the following:
• A Liquid Crystal Display (LCD)
Used for display feedback
• A
WAKE–UP
push-button
Used to control the power to peripheral devices
• A
SELECT
push-button
Used to scroll through menu items
• An
ENTER
push-button
Used to select menu items
4.2 Powering the Unit
To turn Ngara on, press and hold the wake-up button until
NGARA
or a firmware version identifier is displayed on the
LCD.
If the power cable has been unplugged or the Ngara has been turned off, please wait 1 to 2 minutes
before trying to turn the Ngara back on.
4.3 Menu Structure
The menu provided follows a
tree
structure.
Cycling through each menu item is achieved through the
SELECT
push button, whilst selecting a menu item is achieved
through the
ENTER
push-button.
4.4 Configuration Menu Item (Menu 1)
Items available through the configuration menu give the ability to update settings which will affect
common
logger
operations.
Version — 25-7cd7566
Page — 23 of 80
Содержание Ngara
Страница 1: ...Ngara User Manual 25 7cd7566...
Страница 77: ...Ngara User Manual Figure 47 10Hz to 1kHz Version 25 7cd7566 Page 77 of 80...
Страница 78: ...Ngara User Manual Figure 48 10Hz to 10kHz Version 25 7cd7566 Page 78 of 80...
Страница 79: ...Ngara User Manual Figure 49 1kHz to 10kHz Version 25 7cd7566 Page 79 of 80...