4
III. Powering the Speakers
There are two options to power your wireless speakers:
i. AC Power Adapter:
Battery
Battery
Battery
Battery
Battery
Battery
Battery
Battery
Warning:
This product is designed to work with line level outputs or
headphone outputs
only
.
DO NOT
connect it directly to speaker outputs, as
it will permanently damage the transmitter.
Important:
If you are using rechargeable batteries, the batteries will charge when the
speakers are powered with the AC power adapters (the “standby/charging”
light will illuminate green). The AC adapters will charge rechargeable NiMH
or NiCd batteries. DO NOT attempt to charge any other batteries except
those specified above.
1. Turn the speaker volume down by
rotating the power/volume/scan
control (C) on the front of the
speaker all the way to the left.
2. Insert the small, round plug from
one speaker AC power adapter (N)
into the speaker power input jack
(E).
3. Plug the other end of the speaker
AC power adapter into any
standard 120V AC wall outlet.
Note:
Be sure to use the speaker
AC power adapters rated 15V DC
800 mA
1. Turn the speaker volume down by
rotating the power/volume/scan
control (C) on the front of a
speaker all the way to the left.
2. Remove the battery compartment
cover (D) on the rear of a speaker.
3. Insert eight (8) C-cell batteries (not
included) into the speaker
following the polarity (“+” and
“–”) as diagrammed inside the
battery compartment.
4. Replace the battery compartment
cover.
ii. C-cell Batteries:
Speaker
Speaker power
input jack (E)
AC Power
adapter (N)
Battery
compartment
cover (D)
