7
Status
Network connected
Network disconnected
In Network setup mode
In AirPlay mode
(when streaming)
In USB playback mode
When the unit is on
In Standby mode
Powering up
Network indicator
Solid green
Flashing red
Flashing green
-
-
-
-
-
AirPlay indicator
-
-
-
Solid blue
Solid green
-
-
-
Power indicator
-
-
-
-
-
Solid blue
Solid red
Flashing in alternating
blue and red
LED indications
To connect the ARAP50 to your existing home
WiFi network, you need to apply your home WiFi
setting to the unit. There are three ways to do
this:
1. Using the Acoustic Research AR Connect App
– If you are using an iPad, iPhone, or iPod
touch, using the App would be a simple
approach to set up the ARAP50.
2. Sharing settings from your iPad, iPhone, or
iPod touch with iOS 5 installed – If your iPad,
iPhone, or iPod touch has iOS5 or later
installed, using WiFi setup sharing will be the
quickest method to set up the ARAP50.
3. Setting the network parameters manually – If
you are using PC or Mac or you wish to
configure advanced network settings, you
should use this method to setup up the
ARAP50.
Using the Acoustic Research AR
Connect App
1. Use the sync cable that came with your iPad,
iPhone, or iPod touch to connect your device
to the USB port on the back of the ARAP50.
2. Once you connect, your device will prompt
you to download an App to use with the
ARAP50. Select OK to continue.
3. Enter your iTunes password to download and
install the App on your device.
4. Once the App has finished
installing on your device, the
AR
Connect icon
appears on your
device’s home screen. Select this
Connecting to WiFi network
icon to launch the App. This App allows you
to enjoy easy network set up, update
firmware and give a name to the ARAP50
which will appear in the list of choices when
streaming audio. See the Quick Start Guide
for more information on using the App.
• The App is for iPad 2, iPad, iPhone
4S, iPhone 4, iPhone 3GS, iPod
touch include 2nd, 3rd , 4th
generation only (iOS 4.2 or later).
• If you accidentally dismiss the alert that
comes up when you connect your device
to the ARAP50, go to the App store and
search for “AR Connect” to fi nd the App.
• You are encouraged to download and
install this App in order to enjoy easy
network set up and firmware updates.
• Make sure the device you connect to
the ARAP50 is in your WiFi network and
connected to the Internet.
• Keep your device connected to the
ARAP50 USB port while you run the AR
Connect setup App. The App will tell you
when it’s safe to disconnect.