background image

1 -

1

1 -

1

1 -

1

1 -

1

1 -

1

Bhapter 1                                    

B

IOS Set

t

p

Bhapter 1                                    

B

IOS Set

t

p

Bhapter 1                                    

B

IOS Set

t

p

Bhapter 1                                    

B

IOS Set

t

p

Bhapter 1                                    

B

IOS Set

t

p

2. BIOS Setup

Introduction

This manual discussed the Award Setup program built into
the ROM BIOS.  The Setup program allows user to modify
the basic system configuration.  This special information is
then stored in battery-backed RAM so that it retains the setup
information when the power is turned off.
The Award BIOS installed in your computer system’s ROM
(Read Only Memory)is a custom version of an industry
standard BIOS.   The BIOS provides critical low-level
support for standard devices such as disk drives and serial
and parallel ports.
The rest of this manual is intended to guide you through the
process of configuring your system using Setup.

Plug and Play Support

This AWARD BIOS supports the Plug and Play Version
1.0A specification.  ESCD(Extended System Configuration
Data)write is supported.

EPA Green PC Support

This AWARD BIOS supports Version 1.03 of the EPA Green
PC specification.

PCI Bus Support

This AWARD BIOS also supports Version 2.1 of the Intel
PCI (Peripheral Component Interconnect)local bus
specification.

Содержание 6VIA85X



































































Отзывы: