1-15
Chapter 1 Motherboard 4845GVM(V3.1)
Intel
ICH4
VIA
IT8712F
mPGA478B
Socket 478
Intel
845GV
Battery
BIOS
VT610
5
LPC IO
AC'97
ALC101
1.7.3 Floppy Disk Connector: FDD
This connector supports the floppy drive ribbon cable. After
connecting the single end to the board, connect the other end
with the two plugs to the floppy drives.
1.7.4 Hard Disk Connectors: IDE1/IDE2
These connectors are provided with IDE hard disk ribbon
cable into the package . After connecting the end of cable
with single connector to the mainboard, connect the other
two connectors at the other end to your hard disk. If you
install two hard disks, you must configure the second drive
to Slave mode by setting its jumper settings. BIOS now
supports SCSI device or IDE CD-ROM boot up (see "HDD
Sequence SCSI/IDE First" & "Boot Sequence" in the BIOS
Features Setup of the BIOS SOFTWARE).
1.7.5 Fan Connectors: FAN1~3
FAN 3
Connector
Pin
Definition
1
Ground
2
+12VDC
3
Vcc5
1
3
2
FAN1
Connector
FAN2
Connector
FAN1, FAN2 and FAN3 connectors are
for connecting cooling fans to the
Motherboard power. CPU, Chassis,
chips and add-on cards are devices that
need a cooling fan to cool themselves
down.
Содержание 4845GVM
