ACORN ENGINEERING FIELD SERVICE
TOLL FREE
800-743-8259 •
LOCAL
626-855-4866 •
FAX
626-855-4863
INSTALLATION, OPERATIONS & MAINTENANCE MANUAL
®
MERIDIAN 3753-LHL
Please visit
www.acorneng.com
for most current specifications.
FIXTURE ANCHORING
Page 8 of 27
FYI: Fixtures are shipped with wall
mounting brackets pre-installed
onto the fixture.
1
4
2
Secure requirement portions of the fixture 2 , (ADA, TAS etc...) to mounted angle brackets 1 with
of fixture 2 adjust and level as required. Do not over tighten.
¼-20 hex head cap screws, lock washers and fender washers 4 provided.
Secure remaining mounted angle brackets 3 to wall & starting with the flat or requirement portion
Place deck on wall mounted angle brackets 1 and align the remaining mounted angle brackets 3
with installed wall anchors. Fasten to wall loosely and proceed to step C.
C.
D.
E.
NOTE: It may be advantageous to install to the deck, faucets, soap
dispensers or other accessories prior to wall mounting.
Disassemble fixture from crate and remove
angle brackets 1 from flat or requirement
portions of fixture 2 . Loosen remaining
angle brackets 3 but keep finger tight.
A.
plumb as required. All wall anchors and wall
anchoring hardware are by others.
Anchor the free angle brackets 1 to
finished wall using installer provided ½”
anchoring hardware (4 places). Level and
B.
!
IMPORTANT
fixture 2 refers to the stations that
Straight or requirement portions of
are intended to meet ADA Guidelines.
3
2
1
4
4
Part #: 6215-372-000
Revised: 03/05/19
