the work area of the PIR (Passive Infrared) sensor, specifically the
sensing angle and distance. To perform the test:
First strap the camera on a tree aiming the region of
interest (ROI).
Walk slowly from one side of the ROI to the other
parallel to the camera. Try different distances and
angles from the camera.
If the Motion Indicator flashes blue, it indicates the
position from where you are detected by one of the
side Prep PIR sensors. If the Motion Indicator flashes
red, it indicates the position from where you are
captured by the main PIR sensor.
By doing this test, you can find the best placement when
mounting and aiming the Ltl Acorn camera. In general, you are
recommended to place the camera 3 to 6 feet (1 to 2 meters)
above the ground.
To avoid potential false triggers due to temperature and motion
disturbances, please do not aim the camera at a heat source (i.e.
the sun) or nearby tree branches and limbs. The ideal direction
to aim at is North or South. Also, remove any limbs close to
the front of the camera.
2.5 Enter Live Mode
Switch to the ON position to enter the live mode. The Motion
- 12 -
Содержание Ltl-5310 Series
Страница 1: ...Ltl Acorn Mobile Scouting Camera Ltl 5310 Series SMS remote control 720P video USER S MANUAL...
Страница 8: ...Figure 1 1 Front View of Ltl 5310M Figure 1 2 Bottom View of Ltl 5310M 5...
Страница 26: ...Click on Camera Setup and you will see the following interface 23...
Страница 58: ...Appendix III INSTRUCTION ON INSTALLING BATTERY BOX 55...