Acorn multiscan monitor User Guide
Introduction
This colour monitor is intended only for use with the Acorn range
of 32-bit computers using the RISC OS operating system, and will display
Acorn screen modes with the following scan rates: AKF50 series,
15kHz to 38kHz; AKF60 series, 30kHz to 50kHz; AKF70 series, 30kHz to
40kHz. The displayed picture will vary according to the screen mode
selected.
This monitor meets the requirements of the following directives
and standards:
•
EEC Low Voltage Directive
73/23/EEC
•
EEC Display Screen Directive
9 0 / 2 7 0 / E E C (except
AKF52 and AKF53)
•
EMC Directive
89/336/EEC
•
SWEDAC Low Radiation
MPR-2 (except AKF52
and AKF53)
•
Safety of IT Equipment
EN60950
Guidelines for safe operation
This product is not intended for use as a critical component in life
support devices or any system in which failure could be expected
to result in personal injury.
It is most important that installation and operation are carried out in
accordance with the instructions given in this guide. In the interests of
continued safe and reliable operation, observe the following guidelines:
Electrical safety
•
Warning: This equipment must be earthed (grounded) to
prevent electrical shock hazard.
•
To disconnect the equipment from the power supply, the
power lead must be removed from the power outlet.
•
The equipment shall be installed near the power outlet, which
shall be readily accessible.
1
