Acon On-Call OGM-212, Руководство пользователя, Страница: 10 / 56

6
Hypo Symbol: Appears when the blood glucose concentration is below the
“Hypoglycemia” (low blood sugar) target level that you have set.
Test Remind Symbol: Reminding you to test blood glucose.
Meter Use and Precautions

Wait for the Blood Drop and Strip Symbol to appear together before applying
the sample.

The meter is preset to display blood glucose concentration in either millimoles
per liter (mmol/L) or milligrams per deciliter (mg/dL) depending on which unit
of measure is standard in your country. This unit of measure cannot be
adjusted.

Meter will shut off automatically 2 minutes after inactivity.

Do not get water or other liquids inside the meter.

Keep the strip port area clean.

Keep your meter dry and avoid exposing it to extreme temperature or humidity.
Do not leave it in your car. Please use the meter indoor.

Do not drop the meter or get it wet. If you do drop the meter or get it wet,
check the meter by running a quality control test. Refer to Performing a
Quality Control Test on page 21 for instructions.

Do not take the meter apart. Taking the meter apart will void the warranty.

Refer to the Maintenance section on page 42 for details on cleaning the
meter.

Keep the meter and all associated parts out of reach of children.
Note : Follow proper precautions and all local regulations when disposing of the
meter and used batteries.
All Glucose Systems Preventive Warnings with Regard to EMC:

This instrument is tested for immunity to electrostatic discharge as specified in
IEC 61000-4-2. However, use of this instrument in a dry environment,
especially if synthetic materials are present (synthetic clothing, carpets, etc.)
may cause damaging static discharges that may cause erroneous results.

This instrument complies with the emission and immunity requirements
described in EN61326-1 and EN61326-2-6. Do not use this instrument in
close proximity to sources of strong electromagnetic radiation, as these may
interfere with proper operation of the meter.

For professional use, the electromagnetic environment should be evaluated
prior to operation of this device.