Q: My computer does not recognize the DrivePod.
A: Make sure that all of your connections are secure. Make sure that you are
using the AC adapter that was supplied with the DrivePod.
Q: Does the DrivePod work with Norton Ghost?
A: Yes, but only with Norton Ghost 2003.
Q: Is the DrivePod compatible with Windows NT 4.0?
A: No, it is not.
Q: Can you make a DrivePod bootable?
A: Yes, but this depends on your computer’s BIOS. BIOS is an acronym for
Basic Input/Output System. The BIOS contains code required to control a
number of miscellaneous functions. Please check with your computer manu-
facturer for BIOS updates to determine if your computer’s BIOS supports this
feature.
Q: How many DrivePods can you stack per computer?
A: You can stack up to 5 (five) DrivePods.
I
NSTALLING THE
D
RIVE
P
OD
Important Notes:
• Use of a third-party AC adapter and power cord may damage the drive
and void the warranty.
• It is highly recommended that when you install the DrivePod, you connect it to
a USB port on your computer rather than to a USB hub. Once the installation
has been successfully completed, you can re-connect the drive to a USB hub
if you so choose. We recommend this approach because if you experience a
problem during installation, the problem will be easier to troubleshoot if a
USB hub is not used. Please follow the instructions in the section “How to
Safely Dismount and Turn off the DrivePod” on page 24 before switching the
drive to a USB hub.
• Before you install the DrivePod, we recommend that you either restart
your computer, or shut it down and connect the drive with the computer
turned off. This way you can start with a “clean slate” and avoid potential
problems caused by software conflicts or memory fragmentation.
10
35
T
ROUBLESHOOTING
/
F
REQUENTLY
A
SKED
Q
UESTIONS
(FAQ
S
)
Содержание DRIVEPOD
Страница 2: ......
