Acom 2020S, Руководство пользователя, Страница: 51 / 76

User's Manual | ACOM 2020S | 1.8-54 MHz Linear Power Amplifier
June 2022 S e c t i o n MENUS - SETTINGS AND SERVICE FUNCTIONS | Page 51 of 76
5.6.
Menu NETWORK SETTINGS
The menu NETWORK SETTINGS (see
Figure 5-10 | Menu NETWORK SETTINGS
) is accessible from the MENU
SELECTION screen (see
Figure 5-1 | MENU SELECTION
).
This menu is used to set the parameters for LAN (Local Area Network) network connection.
Figure 5-10 | Menu NETWORK SETTINGS
Figure 5-10 | Menu NETWORK SETTINGS
Available network parameters:
•
NETWORK MODE
This parameter is used to choose between:
-
ETHERNET wired (cable) connection (see
2.5.d) RCU's LAN Ethernet interface
connector);
-
Wi-Fi (wireless) connection (see
2.5.e) RCU's Wi-Fi device
interface);
-
DISABLED network connection (in this selection, all other fields are hidden until
either ETHERNET or Wi-Fi is selected).
•
IP ADDRESS ASSIGNMENT
This parameter is used to selects the method to set the IP (Internet Protocol) address, subnet
mask and gateway of the chosen network interface. There are two possibilities:
-
MANUAL
If MANUAL is selected, the fields IP ADDRESS, SUBNET MASK, GATEWAY and DNS are
enabled, and the user is able to set their values, using the on-screen virtual keypad
that pops up once they are touched (see
Figure 5-11 | Virtual keypad
);