60-479 Poznań, ul. Strzeszyńska 56, tel./ fax 061-8439-371
Features:
Works together with digital systems CDNV
and Inspiro
Works as a outside door bell
Ringing volume control
Magnetic handset hang-up mechanism
Hold-function allows hanging up the
receiver and not disconnecting
Additional function button to operate
external devices
Many handsets can be connected to the
same address
Full support of privacy during
conversation
Individual conversation volume control
(integrated amplifier)
1 – Additional function button; 2 – Basic door opening button; 3 – Ringing volume control switch
Mounting the handset
After opening the enclosure mount the basis on the wall using expansion bolts, the wire is lead
out through hole in the basis. The handset address (usually apartment number) is
programmed using jumpers CODE / ADDRESS, the number beside the jumpers should give
the apartment number after adding up.
Operating the handset
In order to take the call, pick up the receiver while it is ringing. During the conversation it is
possible to open the door at the panel that is calling with button No. 2 (optionally – different
devices can be controlled with function button No. 1)
Conversation ends automatically after hanging-up.
In standby mode it is possible to set ringing volume, door bell volume (switch 3). During the
conversation the door bell can be heard in the receiver.
It is possible to open the door or additional gate without established connection or picking-up
the receiver through pushing button 2 (this function has to be enabled in the panel) –
confirmation of opening the door is a single tone. If the line is busy and opening the door is not
possible, the triple tone sounds.
If there are more handsets connected to the same physical address and if one of them is
picked up while all are ringing, the others automatically disconnect (the conversation can not
be heard from other handsets). In case of mixed installation with handsets / video monitors
and need of connecting more monitors to the same address, you have to use INS-MPR
monitors from ACO range.
Connection diagram
In case of higher amount of handsets you need to consider power consumption in order to buy
appropriate power supply (in standby mode and while many ring at the same time – see
„Technical data”)
1
2
3
