Chapter 2
2.1 Front Panel OSD Functions
Auto Adjust
Up/Left Down/Right Power
Menu/Entry
Power Indicator
Power switch: To turn ON or OFF the power
Shift the icon to the right side or shift it up
Shift the icon to the left side or shift it down
Menu: To enter OSD menu for related icon and item.
Auto Button: One-touch auto adjustment
1.) Getting into Burn-in Mode
Before setting into a burn-in mode, first disconnect the AC power cord. Then press (don
‟
t let them go)
the
buttons until the AC power cord is connected and the “RGB” appears on the top lef
t corner
of your screen. Now it can be put into the burn-in mode for changing colors.
2.) Getting Out of Burn-in Mode
Before getting out of the burn-in mode, please first disconnect the AC power cord. Then press the
button (If not workable, press the
button and don
‟
t let them go) until the AC power cord is
connected. Please don
‟
t let your fingers go until the AC power cord is connected again and the
wording of
“
RGB
”
appears on the top left corner of your screen, and wait for 3 seconds. Under the
non-signal entry situation, if
is seen, exit is thus successfully made.
Cable Not Connected
