ACME Xperior 1200, Руководство пользователя

Страница: 6 / 44

XP-1200/1500SZ
5D
2. Installation
Unpacking the fixture (for flight case pack only)
1. Stop the flight case via the brake sheet above the wheels.
2. Unlock the lock modules (1) and (2), open the cover board.
3. Prop the cover board with lid bracket and open the side
board.
4. Take out the fixture.
5. Unlock the lock module (3) take out omega clamps, safety
cable and gobo.
Installation:
1. Bolt each clamp (1) to the Omega holder with screw and lock nut through the hole in the
holder.
2. Fasten the omega holders (2) on the bottom of the base by inserting quick-lock
fasteners (3) into the holes of the base and tighten fully clockwise.
3. Hang the fixture to the support (4) through clamp and fasten the screws (5). Fasten the
safety cable (6) through the bottom of the base and over the support.
Fig.1 Fig.2
Attention:
y
Always ensure that the structure to which you are attaching the unit is secure and is
able to support a weight of 10 times of the unit’s weight without any harming
deformation.
y
Also always use a safety cable that can hold 12 times of the weight of the unit when
installing the fixture.
y
Make absolute sure that the unit is firmly fixed in way that no vibrating or slipping would