ACME Xperior 1200, Руководство пользователя

Страница: 21 / 44

XP-1200/1500SZ
20D
lamp is off via DMX signal, you can reconnect the DMX controller to make the lamp on).
Off If DMX Off - Lamp turns off when DMX signal is cut off
Select Off If Dmx Off , press ENTER button to confirm, present mode will blink on the
display, use UP and DOWN button to select Yes (Lamp turns off when DMX signal is
cut off), press ENTER button to store. Press MENU button back to the last menu or let
the unit idle one minute to exit menu mode.
Cooling Mode - Lamp turns off when DMX signal is cut off
Select Cooling Mode , press ENTER button to confirm, present mode will blink on
the display, use UP and DOWN button to select Auto (fans speed adjust automatically)
or High (fans run in high speed), press ENTER button to store. Press MENU button
back to the last menu or let the unit idle one minute to exit menu mode.
Ignition Delay - Delay time between power on and lamp on
Select Ignition Delay , press ENTER button to confirm, present mode will blink on the
display, use jog wheel to adjust the delay time from 0S to 255S, press ENTER button to
store. Press MENU button back to the last menu or let the unit idle one minute to exit
menu mode.
Low Power Delay - Delay time between reduce lamp power and shutter off the unit
Select Low Power Delay , press ENTER button to confirm, present mode will blink on
the display, use jog wheel to adjust the delay time from 0S to 255S, press ENTER
button to store. Press MENU button back to the last menu or let the unit idle one minute
to exit menu mode.
(If you set the low power delay time to 3S, the lamp will run in half power 3 seconds
after the unit shutters off)
Display Setting
Enter menu mode, select Display Setting , press ENTER button to confirm, use jog
wheel to select Display Inverse, Backlight Auto Off, Backlight Intensity or
Temperature unit.
Display Inverse
Select Display Inverse , press ENTER button to confirm, present mode will blink on the
display, use jog wheel to select No (normal display) or Yes (inverse display), press
ENTER button to store. Press MENU button back to the last menu or let the unit idle