4.6 Lock Upgrade
This mode is used for "one to one" upgrade when the upgrade process is failed for many times.
1.
Link the fixture and the Uploader with 3-pin or 5-pin DMX cable.
2.
Switch on the Uploader, enter menu mode, use the
UP/DOWN
button to select "
Firmware
Upgrade
", press the
ENTER
button to confirm.
3.
The Uploader will automatically search for the software file stored in the SD card, use the
UP/DOWN
button to select the software file, press the
ENTER
button to confirm.
Note: Please select the correct software file and its version according to the fixture model, the
upgrade process can only be done when the software file is correctly selected.
4.
Use the
UP/DOWN
button to set the upgrade speed (Fast / Slow).
5.
Turn on the power of the luminaire.
6.
Press the
ENTER
button to confirm, the Uploader will start to upgrade the software.
Note: Normally, Fast speed will be selected to upgrade the software. When repeated failures
occurred, please change to Slow speed.
7. When the upgrade process is displayed to 100%, it means that the luminaire has completed the
upgrade process.
9E
