Linear:
The increase in light intensity appears to be linear as DMX value is increased.
Square Law:
Light intensity control is finer at low levels and coarser at high levels.
Inverse Square Law:
Light intensity control is coarser at low levels and finger at high levels.
S-cure:
Light intensity control is finger at low levels and high levels and coarser at medium levels.
Dimmer Speed
To select
Dimmer Speed
, press the
ENTER
button to confirm. Use the
UP/DOWN
button to
select
Fast
or
Smooth
. Once selected, press the
ENTER
button to setup. Press the
MENU
button
back to the last menu or let the unit idle one minute to exit menu mode.
Display Setting
Enter MENU mode, select
Display Setting
, press the
ENTER
button to confirm, use the
UP/DOWN
button to select
Display Inverse, Backlight Auto Off, Backlight Intensity ,Temperature unit,
Display Warning
or
Language.
Display Inverse
To select
Display Inverse
, press the
ENTER
button to confirm. Use the
UP/DOWN
button to
select
No
(normal) or
Yes
(display inverse). Once selected, press the
ENTER
button to store. Press
the
MENU
button back to the last menu or let the unit idle one minute to exit menu mode.
Backlight Auto Off
To select
Backlight Auto Off
, press the
ENTER
button to confirm. Use the
UP/DOWN
button
to select
No
(display always on) or
Yes
(display goes off one minute after exiting menu mode).
Once selected, press the
ENTER
button to confirm and store. Press the
MENU
button back to the
last menu or let the unit idle one minute to exit menu mode.
11G