Tilt Inverse
To select
Tilt Inverse
, press the
ENTER
button to confirm. Use the
UP/DOWN
button to select
No
(normal) or
Yes
(tilt inverse), press the
ENTER
button to setup. Press the
MENU
button back to
the last menu or let the unit idle one minute to exit menu mode.
P/T Feedback
To select
P/T Feedback
, press the
ENTER
button to confirm. Use the
UP/DOWN
button to
select
No
(Pan or tilt’s position will not feedback while out of step) or
Yes
(Feedback while pan/tilt
out of step), press the
ENTER
button to setup. Press the
MENU
button back to the last menu or let
the unit idle one minute to exit menu mode.
BL.O. P/T Moving
To select
BL.O. P/T Moving
, press the
ENTER
button to confirm. Use the
UP/DOWN
button to
select
No
(normal while pan/tilt moving) or
Yes
(blackout while pan/tilt moving), press the
ENTER
button to setup. Press the
MENU
button back to the last menu or let the unit idle one minute to
exit menu mode.
White Balance
To select
White Balance
, press the
ENTER
button to confirm. Use the
UP/DOWN
button to select
Red
,
Green
or
Blue
. Once selected, press the
ENTER
button to confirm, and use the
UP/DOWN
button to adjust the value from 125 to 255, press the
ENTER
button to setup. Press the
MENU
button back to the last menu or let the unit idle one minute to exit menu mode.
Cooling Mode
To select
Cooling Mode
, press the
ENTER
button to confirm. Use the
UP/DOWN
button to
select
Auto
(Normal) or
Low
(Low speed). Once selected, press the
ENTER
button to setup. Press
the
MENU
button back to the last menu or let the unit idle one minute to exit menu mode.
Dimmer Curve
To select
Dimmer Curve
, press the
ENTER
button to confirm. Use the
UP/DOWN
button to
select
Linear
,
Square Law
,
Inverse Squ.
or
S-curve
. Once selected, press the
ENTER
button to store.
Press the
MENU
button back to the last menu or let the unit idle one minute to exit menu mode.
10G