ACME MP-90 RGBW, Руководство пользователя, Страница: 11 / 16

Fixture Hours
Press the MENU button up to when is blinking on the display. Pressing ENTER button and
the display will show the number of working hours of the unit. To go back to the functions press the
MENU button.
Software version
Press the MENU button up to when is blinking on the display. Pressing ENTER button and
the display will show the version of software of the unit. To go back to the functions press the
MENU button again.
4. How To Control The Unit
You can operate the unit in three ways:
1. By master/slave built-in preprogram function
2. By DMX controller
No need to turn the unit off when you change the DMX address, as new DMX address setting will be
effected at once. Every time you turn the unit on, it will show “MP90” on the display and move all
the motors to their ‘home’ position. After that the unit will be ready to receive DMX signal or run
the built in programs.
4.1 Master/Slave Built In Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the other units to give an
automatic, sound activated, synchronized light show. This function is good when you want an
instant show.
2-light show
In slave mode, Slave1 or Slave 2 means 2-light show. In order to create a great light show, you can
set Slave1 or Slave 2 on the second unit to get contrast movement to each other, even if you have
two units only.
4.2 DMX Controller
Use universal DMX controller to control the units, you have to set DMX address from 1 to 512
channel so that the units can receive DMX signal.
Press the
MENU
button up to when is showing on the display. Pressing
ENTER
button and
the display will blink. Use DOWN and UP button to change the DMX512 address. Once the address
10A