ACME MP-90 RGBW, Руководство пользователя, Страница: 10 / 16

the display will blink. Use DOWN and UP button to select (display always on) or
(display off 20 seconds after exit menu) mode. Once select, press ENTER button to setup or
exit menu mode without any change after one minute. Back to the functions without any change
press
MENU button again.
Display Inverse
Press MENU button until is blinking on the display. Use DOWN and UP button to select
(display normal) or (display inverse), press ENTER button to setup. Back to the
functions without any change press MENU button.
White Balance
Press the MENU button up to when is shown on the display. Pressing ENTER button, and
use DOWN and UP button to select , or , press ENTER button to confirm
and use DOWN and UP button to adjust the value between 125 and 255, once select press ENTER
button to setup or automatically exit menu mode without any change after one minute. To go back
to the last function without any change press the
MENU button.
Manual setting color
Press the
MENU
button up to when is shown on the display. Pressing
ENTER
button, and
use DOWN and UP button to select , or … or (strobe), press ENTER
button to confirm and use DOWN and UP button to adjust the value, once select press ENTER
button to setup or automatically exit menu mode without any change after one minute. To go back
to the last function without any change press the
MENU button.
Self-Test
Press the MENU button up to when the is blinking on the display. Pressing ENTER
button and the unit will run the built-in programmer for self-test. To go back to the functions
press the
MENU button.
Temperature Test
Press the MENU button up to when is blinking on the display. Pressing ENTER button and
the display will show the temperature of the unit. To go back to the functions press the MENU
button again.
9A