ACME MP-350Z, Руководство пользователя

Страница: 8 / 16

ENTER button to save or automatically exit menu mode without any change. Back to the previous
functions without any change press the MENU button.
Dimmer Curve
Select Dimmer Curve , press the ENTER button to confirm, present mode will blink on the display.
Use the DOWN and UP button to select the Mode1 or Mode 2 or Mode 3 or Mode 4 mode. Once
the mode has been selected, press the ENTER button to setup, to go back to the functions without
any change press the MENU button again. Hold and press the MENU button about one second or
wait for one minute to exit the menu mode.
Mode 1 (Optically Linear): The increase in light intensity appears to be linear as DMX value is
increased.
Mode 2 (Square Law): Light intensity control is finer at low levels and coarser at high levels.
Mode 3 (Inverse Square Law): Light intensity control is coarser at low levels and finger at high
levels.
Mode 4 (S-cure): Light intensity control is finger at low levels and high levels and coarser at
medium levels.
Beam Mode
Select the Beam mode , press the ENTER button and the display will blink. Use the DOWN and UP
button to select the Yes (Beam mode) or No (Normal). Once selected, press the ENTER button to
save or automatically exit menu mode without any change. Back to the previous functions without
any change press the MENU button.
DMX State
Select the DMX State , press the ENTER button and the display will blink. Use the DOWN and UP
7A