ACME MP-350Z, Руководство пользователя

Страница: 10 / 16

temperature of the fixture. Press the MENU button to exit.
Fixture Time
Select the Fixture Time , press the ENTER button and the display will show the running time of the
fixture. Press the MENU button to exit.
Firmware Version
Select the Firmware Versio n, press the ENTER button and the display will show the software
version of the fixture. Press the MENU button to exit.
Reset
Select the Reset , press the ENTER button and the fixture will now reset.
3.3 Home Position Adjustment
ZOOM Offset
000
255
Zoom Offset —zoom home position adjustment
Enter offset mode, Select Zoom Offset , press the ENTER button to confirm, the present position
will blink on the display, use the UP / DOWN button to offset the value from 0 to 255, press the
ENTER button to store. Press the MENU button to exit.
4. How to Control the Unit
Please access the fixture in two ways:
1. By master/slave built-in preprogram function
2. By DMX controller
No need to turn the fixture off when you change the DMX address, as new DMX address setting
will be affected at once. Every time you turn the fixture on, it will show “MP-350Z” on the display
and move all the motors to their ‘home’ position. After that the fixture will be ready to receive
DMX signal or run the built in programs.
9A