8
.
Display:
To show the various menus and the selected functions
9
.
Safety Ring
: Keep the installation safe
10. Ethernet
: To transfer the unit’s information to the main controller
4.2 Main Function
To select any functions, press
MENU
button until the required one is shown on the display.
Select the function by
ENTER
button and the display will blink. Use
DOWN
and
UP
button to
change the mode. Once the required mode has been selected, press
ENTER
button to
setup or it will automatically return to the main functions without any change after idling one
minute. Back to the functions without any change press
MENU
button. The main functions
are shown below:
DMX Address
Select
DMX Address
, press the
ENTER
button to confirm, the present address will blink on
the display. Use the
UP
and
DOWN
button to adjust the address from
1
to
512
. Once the
address has been selected, press the
ENTER
button to setup, to go back to the functions
without any change press the
MENU
button again. Hold and press the
MENU
button about
one second or wait for one minute to exit the menu mode.
6A
