ACME LP-F2000 VW, Руководство пользователя, Страница: 9 / 20

Mode 1(Optically Linear):
The increase in light intensity appears to be linear as DMX value is increased.
Mode 2(Square Law):
Light intensity control is finer at low levels and coarser at high levels.
Mode 3(Inverse Square Law):
Light intensity control is coarser at low levels and finger at high levels.
Mode 4(S-cure):
Light intensity control is finger at low levels and high levels and coarser at medium levels.
Slave Mode
Select the Slave Mode, press the ENTER button to confirm, use the UP and DOWN button to
select the Master or Slave mode, press the ENTER button to store. Press the MENU button back to
the last menu or idling 30 seconds to exit menu mode.
DMX State
Select DMX State, press the ENTER button to confirm, the present mode will blink on the display,
use the UP and DOWN button to select Master Slave, Blackout or Hold, press the ENTER button to
store. Press the MENU button back to the last menu or idling 30 seconds to exit menu mode.
White Balance
Select White Balance, press the ENTER button to confirm, the present mode will blink on the
display, use the UP and DOWN button to select WW or CW and adjust the value from 50 to 100 ,
press the ENTER button to store. Press the MENU button back to the last menu or idling 30
seconds to exit menu mode.
Display Setting
Select Display Setting , press the ENTER button to confirm, use the UP and DOWN button to select
8A