ACME LP-F2000 VW, Руководство пользователя, Страница: 11 / 20

Select Fixture Time , press the ENTER button and the display will show the number of working
hours of the unit. To go back to the functions press the MENU button again.
Firmware Version
Select Firmware Version, press the ENTER button and the display will show the version of
firmware of the unit. To go back to the functions press the MENU button again.
Factory Setting
Select Factory Setting , press the ENTER button to confirm, the present mode will blink on the
display, use the UP and DOWN button to select the No or Yes, the fixture will back to factory
setting once select Yes.
4. How To Control The Unit
You can operate the unit in two ways:
1. By master/slave function
2. By DMX controller
3. By multimedia software via ArtNet
No need to turn the unit off when you change the DMX address, as new DMX address setting will
be affected at once.
4.1 Master/Slave Function
By linking the units in master/slave connection, the first unit will be master automatically. You
should set the master unit effect via its knobs, then the other units (slave) will lighting as the
same.
4.2 DMX Controller
If you use a universal DMX controller to control the units, you have to set DMX address from 1 to
512 so that the units can receive DMX signal.
Press the MENU button to enter menu mode, select DMX Functions , press the ENTER button to
confirm, use the UP/DOWN button to select DMX Address , press the ENTER button to confirm,
the present address will blink on the display. Use the UP/DOWN button to adjust the address from
10A