ACME LITE PANEL 900 LP-900 CW BD30, Руководство пользователя

Страница: 10 / 16

should set the master unit effect via its knobs, then the other units (slave) will lighting as the
same.
4.2 DMX Controller
When using a universal DMX controller to control the units, you must set a DMX address from 1 to
512.
Press the MENU button up to when is showing on the display. Press the ENTER button and
the display will blink. Use the DOWN / UP buttons to change the DMX 512 address. Once the
address has been selected, press and hold the ENTER button until the display stops blinking or it
will store automatically 30 seconds later. To go back to the functions without any change press the
MENU button again.
If you use please refer to the following diagram to address your DMX512 channel for the first 4
units.
1 Channel Mode:
5. DMX512 Configuration
1 Channel Mode:
CHANNEL VALUE FUNCTIONS
1
0 ~ 255
DIMMER
0  100%
9