ACME LED-ST5000 RGB, Руководство пользователя

Страница: 13 / 16

12 A

Pin 2 on the Mode DIP switch ON to choose BF-04D function.
The optional remote control for BF-04D provides the following:

Slider controls for chase speed and intensity.

Momentary push button control of the blinder effect, when the LED of
BLACK OUT is on, that means chase is stop.

Momentary push button for single flash and flash synchronization, when
the LED indicator of BLACK OUT is on, that means chase is stop.

Chase number toggle switch

Chase mode toggle switch: AUTO/SOUND
DATA CONNECTION
Important: Do not terminate the data link when using the BF-04D!
The remote controller connects to The LED-ST5000 with a 3-pin XLR data
cable. Additional LED-ST5000 may be connected in series, output to input.
Note, however, that the data link must not be terminated as described DMX
controllers and the LED-ST5000 should change to the remote control function.
OPERATION
Intensity

Flash intensity is controlled from 20% of the maximum Intensity to 100%
of the maximum Intensity with the DIMMER fader.

The maximum intensity is reduced in low power mode, which is selected
on pin 6 of the Mode DIP switch.
Chase Speed

Chase speed is controlled from slow to fast with the SPEED fader.

The BLACK OUT button toggles chase run on and off. The indicator diode