ACME LED-MTX25 IP, Руководство пользователя, Страница: 7 / 20

6B
○
1 Display: Show the various menus and the selected functions
○
2 LED:
DMX
On DMX input present
MASTER On
Master Mode
SLAVE
On Slave Mode
○
3 Button:
MENU
To select the programming functions
DOWN
To go backward in the selected functions
UP
To go forward in the selected functions
ENTER
To confirm the selected functions
○
4 DMX input: For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal.
○
5 DMX output: For DMX512 link, use 3/5-pin XLR plug cable to link the next unit.
○
6 Mains input: Connect to supply mains power.
○
7 Mains output: Connect to supply mains power for the next unit.
4.2 Main Function
To select any functions, press MENU button until the required one is shown on the display.
Select the function by ENTER button and the display will blink. Use DOWN and UP button to
change the mode. Once the required mode has been selected, press ENTER button to setup
or it will automatically return to the main functions without any change after idling 30
seconds. Back to the functions without any change press MENU button. The main functions
are shown below: