ACME LED-MTX25 IP, Руководство пользователя, Страница: 11 / 20

10B
Auto Test
Select the , press the ENTER button and the unit will run the built-in programmer for
Auto test. To go back to the functions press the MENU button.
Fixture use time
Select the , press the ENTER button and the display will show the number of working
hours of the unit. To go back to the functions press the MENU button.
Firmware version
Select the , press ENTER button and the display will show the version of software of the
unit. To go back to the functions press the MENU button.
5. How To Control The Unit
You can operate the unit in two ways:
1. By master/slave built-in preprogram function
2. By DMX controller
No need to turn the unit off when you change the DMX address, as new DMX address setting
will be affected at once. Each time you turn the unit on, it will show “ ” on the display.
After that the unit will be ready to receive DMX signal or run the built in programs.
5.1 Master/Slave Built In Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the other units to
give an automatic, sound activated, synchronized light show. This function is good when you
want an instant show. You have to set the first unit in master mode and select (random
show), (show 1) or …or (show 8). Its DMX input jack will have nothing
plugged into it, and Its master LED will be constantly on and sound LED will flash to the
music.
5.2 DMX Controller
Using universal DMX controller to control the units, you have to set DMX address from 1 to