ACME LED-LP400, Руководство пользователя

Страница: 10 / 16

9A
5.1 Master/Slave Function
By linking the units in master/slave connection, the first unit will be master automatically. You
should set the master unit effect via its knobs, then the other units (slave) will lighting as the
same.
5.2 DMX Controller
An universal DMX controller to control the units, you have to set DMX address from 1 to 512
channel so that the units can receive DMX signal.
Press the MENU button up to when the is showing on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to change the DMX512 address.
Once the address has been selected, press and keep ENTER button pressed up to when the
display stops blinking or storing automatically 30 seconds later. To go back to the functions
without any change press the MENU button again.
If you use please refer to the following diagram to address your DMX512 channel for the first
4 units.
2 channels:
3 channels
: