7C
the display stops blinking or storing automatically 8 seconds later. To go back to the
functions without any change press the
MENU
button again. If you use please refer to the
following diagram to address your DMX512 channel for the first 4 units.
5. DMX512 Configuration
4C
DMX 512 Address Setting
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the DMX 512 address.
Once the address has been selected, press
ENTER
button to setup or automatically return
to the main functions without any change after 10 seconds. Back to the previous functions
without any change press
MENU
button.
Master Mode
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button, Use
DOWN
and
UP
button to select the
, Pressing
ENTER
button, Use
DOWN
and
UP
button to select the
or
. Select the
Pressing
ENTER
button, Use
DOWN
and
UP
button to select the
or
. Select the
Pressing
ENTER
button. Use
DOWN
and
UP
button to select the Yes or No
Blackout, Back to the main functions, press the
MENU
button twice.
Slave Mode
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button, Use
DOWN
and
UP
button to select the
or
(Slave Mode 1and 2).
Back to the previous functions without any change press
MENU
button.