ACME LED-4TC, Руководство пользователя

Страница: 9 / 20

8-
DMX 512 Address Setting
Press the MENU button up to when the is shown on the display. Press ENTER
button and the display will blink. Use DOWN and UP button to change the DMX512 address.
Once selected, press the ENTER button to store or automatically return to the main
functions without any changes after 8 seconds. To go back to the functions without any
change press the MENU button again.
Channel mode
Press the MENU button up to when the is shown on the display. Pressing the
ENTER button and the display will blink. Use the DOWN and UP button to select the
(channel 1) or (channel 2) or (channel 3) or (channel 4)
mode. Once the mode has been selected, press the ENTER button to setup or automatically
return to the main functions without any change after 8 seconds. To go back to the functions
without any change press the MENU button again.
Show Mode
Press the MENU button up to when the is shown on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to select the (show 8)
or (show 1) or (show 2) or
…
(auto show). Once the show has
been selected, press the ENTER button to confirm, if you select (show 1) or
(show 2) or
…
(show 12), you can press DOWN and UP button to select
(slowest) or
…
(fastest), press ENTER button to store or automatically
return to the main functions without any change after 8 seconds. To go back to the functions
without any change press the MENU button again.
Chase Mode
Press the MENU button up to when the is shown on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to select the (chase 1)
or
… or
(chase 16) or (fade). Once the chase has been selected, press
the ENTER button to confirm, then press DOWN and UP button to select (slowest)