ACME LED-4TC, Руководство пользователя

Страница: 11 / 20

10-
Color Mode
Press the MENU button up to when the is shown on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to select the (color 1)
or
… or
(show 16) or (manual setting). Once select, press the ENTER
button to confirm, if you select (manual setting), you can press DOWN and UP
button to select (red) or (green) or (blue), press ENTER button to
confirm, then use DOWN and UP button to adjust the value (0-255) and press ENTER
button to store, automatically return to the main functions without any change after 8
seconds. To go back to the functions without any change press the MENU button again.
Led Display
Press the MENU button up to when the is shown on the display. Pressing ENTER
button and the display will blink. Use DOWN and UP button to select the (Led on)
or (Led off) mode. Once the mode has been selected, press the ENTER button to
setup or automatically return to the main functions without any change after 8 seconds. To
go back to the functions without any change press the MENU button again.
Display Inversion
It is good for you to install the unit on the floor or under ceiling. Press the MENU button up to
when the is shown on the display. Pressing ENTER button and the display will blink.
Use DOWN and UP button to select the (display inversion) or (display
normal). Once select, press the ENTER button to setup or automatically return to the main
functions without any change after 8 seconds. To go back to the functions without any
change press the MENU button again.
Fixture Temperature
Press the MENU button up to when the is blinking on the display. Pressing ENTER
button and the display will show the temperature of the unit. To go back to the functions press
the MENU button again.